Home > Products > Guitar > Jaguar




Base Price :

$179 USD

No ORDER Form on this site. Please place your order on the mobile site :





Punk-Jag ~ Zero-Hum


 


Punk is not dead!!!

 

 

 

 

Kinman Jaguar pickup with it's new Kinman one-piece non-magnetic Claw and our new Kinman cover.

 

 

 

 

Tatiana DeMaria belting it out on YouTube - what a woman, what a song writer, what a performer, and she's not a bad guitar player either !!!

 Punk will always be alive!!! 

and this exciting and inspiring piece by TAT proves it.  We miss you Tat :(  Original great Lyrics by Tat

The Punk-Jag delivers the sharp, percussive attack for a great Punk sound.  Archetype Non-Aged Fender sound delivers exceptional dynamic range and explosive thwack attack, excellent transparent piano mid tones and harmonic ring, outstanding twang, sweet glassy highs without any Ice-pick. 

This Zero-Hum Jaguar* for Punk is like our non-aged-sound Texas Jalapeno v3 Strat* pickup, but because Jags have a shorter scale length the sound will be deeper, more throaty.  Also our's has staggered magnets which give you nicely balanced string output levels which we know you are gonna dig. 

Magnum Opus sets now available in the Mixed Sets order form.  The Magnum Opus versions are especially valuable for Jaguars because the low string tension of Jags more easily cause Torn Cone Syndrome (TCS) and like our Magnums for Stratocaster, incorporate our TCS Inhibiting technology and have a bit extra oomph and presence.  There is no doubt these are the finest Jaguar pickups available.

Laser engraved nomenclature so you won't forget what powers your Jaguar

COVERS news Dec-22:  We now have our own Jaguar covers that don't require modifying the opening in the pickguard like all generic covers do.  Available in White, Aged White, Parchment, Gibson Cream and Black.  We can now supply 52.5mm, 51mm and 49.5mm magnet spreads in any of our 5 colors to suit any type of bridge (wide vintage or modern narrow such as Mastery, Tune-O-Matic and so on)

IMPORTANT info for you Jaguars short scale results in lower string tension which produces more string crash and pitch warble however Kinmans proprietary Alnico-K** low strength magnets reduce string crash and buzz as well as allow longer sustain and minimize pitch warble.
 


Technical & Application info:


Kinman pickups for Jaguar are direct replacements and no modification to the guitar or the openings in the pickguard is required like all generic covers.

Some people will call these noiseless Jaguar pickups but Kinman prefers to describe them correctly as Zero-Hum Jaguar pickups.  That's because there are 2 types of noise, Hum which is cancelled in the pickup and Buzz which can only be minimized by shielding the wiring cavities (refer to >Technical >Perfect Guitar >Shielding for newer guitars

** Alnico-K is a unique proprietary rod magnet developed by Kinman in 1985.  It is Alnico-5 but has 40% less string pull than Alnico-5 so sustain is longer and there is much less clatter from string crash and no Strat-itis string warble.

* Fender, Strat, Jaguar and Jag are registered Trade Marks of Fender Musical Instrument Corp, Inc.  Kinman is not associated with FMIC but they kindly permit us to refer to their Trade Marks to describe our products.
 

Number of parts in this pickup: 31
Number of parts in regular single coil: 11
Number of parts in other brand noiseless: There are no other noiseless Jaguar pickups with Alnico rod magnets.  Kinman is the only one and that makes it the coolest Jaguar pickup available.

Laser engraved nomenclature so you will always know
what powers your Jaguar.

 

Pickup adjustment

As with all Kinman Gen-2 pickups these are very sensitive to height adjustment.  A good starting point, so the neck and bridge pickups balance, is with the two E strings fretted at the 15th fret, adjusted as follows ...

  • bridge pickup so the string-to-magnet gap is 1.25mm for both E strings
  • neck pickup so the string-to-magnet gap is 1.5mm for both E strings

Connection means that are available

  • Bared wires for soldering.
  • Kinman connectors for plugging into any Kinman Goodbye-Soldering Harness.  We can make Goodbye-Soldering Harness for Jaguars that do not have the upper control panel.

Hook-up wires

  • 3 single wires is standard.  Allows for phase reversing and series connection.  Cut generously longer than necessary for the 2 pickup positions.
  • Single non-shielded wires require shielding in the cavities that carry wiring to prevent electrical buzz.  See >Technical >Perfect Guitar >Shielding for newer guitars
  • We use Fenders color codes.

Output Polarity: 

  • in-phase with all other Kinman pickups (compatible)
  • in-phase with Gibson and Copy humbuckers (compatible)
  • opposite phase to Fender Strat etc (compatibility requires phase reversal of either pickup)
  • Phase reversible by swapping the connection of the Red and White wires

Pot & Capacitor values

  • Recommended 250k Ohm Volume pot (measured).  Thinner sound with 500k or 1Meg for volume & Tone.
  • Normal tone cap value of 0.022μF in 63 ~ 100 volt.  Smaller values lessen the severity of Treble cut.
  • Tone pot is usually the same value as the volume.  A little more top end brightness from 500k, 1meg or even better a No-Load.
  • It's easy to change the pot in the main circuit, it's difficult to find the smaller one in the separate upper control circuit for the neck pickup. 

Magnet spreads (E-1st ~ E-6th)

  • A mix of two of the following that provide optimum string-over-magnet alignment
  • Standard 52.5mm
  • Intermediate 51mm
  • Narrow 49.5mm
  • Indicate the bridge saddle spread in the Ordering Process so we know which ones you need.

Magnet Staggers

  • Normal improved Stagger to suit 7 ~ 14 inch uniform radius fretboards
  • Flat Stagger for specific compound radius fretboards (Warmoth 10 ~ 16 inch and Post 2010 Fender Deluxe 9 ~ 14")
  • Option to specify the magnet stagger in our 'After-Order Additional Questions' email we send you.

Mounting hardware included

  • 2 of our specially made improved mounting screws.
  • 2 Silicon Rubber tube springs are included.
  • Kinman one one-piece special non-magnetic Claw that is fixed to the pickup.

Covers

  • We now have our own Jaguar covers.  Beautifully crafted with no sharp edges, and fits any and all pickguard openings without modification
  • White, Parchment, Ivory, Aged White, genuine Cream and Black.
  • Optional de-glosssing for an old look.
  • With and without the Kinman logo.

We highly recommend consulting the Install Guide in the Technical section even if you think you know it all.  Kinmans' require a little bit of specialized knowledge and sometimes there is updated info.

We also highly recommend consulting the Adjust & Set-up page also in the Technical section so you get the best out of your Kinman pickups.